Allied Motion makes gearmotors, including right angle and parallel types. Their right angle gearmotors run at 1/30, 1/20, 1/10, or 3/8 HP, with a rated torque from 20 pounds per inch to 155 pounds per inch, and a rated speed from 33.5 rpm to 170 rpm. These are 3-inch diameter gearmotors wound for 12 VDC with a continuous shaft power output rating up to 1/30 HP.

Bison Gear & Engineering Corporation makes parallel shaft and right angle gearmotors, as well as Verdant Duty Inverter gearmotors, with torque from 7 to 950 pounds per inch, a ratio of 5 to 214.5, and 1/20, 1/4, or 1/2 HP. They also offer AC and DC right angle, FlexTorq Hollow Shaft and VWDIR gearmotors. Speeds from 1.2 to 230 rpm are available.

Bodine Electric Company makes AC and DC parallel shaft and right angle gearmotors. Their 30R-3RD series AC right angle gearmotors feature torque of 88 to 148 pounds per inch, and are totally enclosed and non-ventilated with an IP20 rating and class "B" insulation. AC 3-phase inverter duty gearmotors offer torque from up to 35 oz-in to up to 445 oz-in.

RAE Corpoation makes right angle, parallel shaft and planetary gearmotors. All gearmotors feature continuous duty with torque ratings up to 300 inches per pound and speeds up to 400 rpm, class "F" insulation, 0.750" standard shaft diameter, from 12 to 180 VDC, 5:1 to 125:1 ratios, and more.

Exlar Corporation is a designer and manufacturer of gear motors, roller screw linear actuators, rotary servo motors and other electronic products for motion control applications. Products offered feature load ratings to 40,000 lb, speeds to 60 in/sec, completely sealed units, servo drive operation and integrated actuator/control/drive. Custom products are also available.

Baldor makes AC and DC gearmotors, servo rated gearheads, and speed reducers. Their AC gearmotors feature 1.0 - 13.8 rpm, 101 - 375 torque (lb-in), 1/80 - 1/6 hp, 120:1 to 1369.3:1 ratios, TENV or TEFC enclosures, and voltages of 115v, 208-230/460v, 190/380-415//230/460V, and 115/230v.

MultiProducts Company offers AC, DC and stock gearmotors. Their AC gearmotors include four shaded pole induction motors, as motor heads or complete gearmotors, with standard voltages between 24VAC and 240VAC at 50 or 60Hz operation, and are made from sturdy die cast zinc. Their DC gearmotors are designed for standard input from 6 to 24 volts with sintered bronze sleeve bearings.

Sterling Electric makes helical gearmotors with HP from .33 to 30, made of cast iron, rolled steel, or stainless steel, with a TEFC or TENV enclosure. Their DB0024PCA motor is suitable for 208 volt operation, 50 hz or 60 hz, torque with 1.0 service factor at 190/380V, 200/400V or 208/416V, 2 hp, 1800 rpm, 3-phase, TEFC enclosure, and a 145TC frame size.

Toledo Gearmotor offers quality gearmotors, including right angle gearmotors available in 11 gear ratios, 56C frame (143 frame and shaft-mount units available), ratios of 5.5:1 to 80:1, 27 to 3.36 hp in, .14 to 3.06 hp out, and torque out of 239 to 1138 in/lbs. These right angle gearmotors are available with 3 output shaft extensions (left, right, both).

Dumore Corp makes gearmotors, including parallel shaft and right angle gearmotors with single and double shaft extensions and optional clutches, encoders and brakes. Their PMDC parallel shaft inline gear motors feature continuous rated torque of 30 in/lbs to 1000 ft/lbs, 50-300 rpm to 2-1500 rpm, and voltages of 12-240 VDC..

Copal Nidec makes spur gearboxes with metal gears and planetary gearmotors, with their brushless models with a voltage of 6 or 12 VDC, stall current of 800mA, rated current of 450 or 350mA, rated torque of 1.50 or 2.00mNm, stall torque of 2.50 or 5.00mNm, rated speed of 6600 or 9500RPM, and a no-load speed of 10,000 or 13,000 rpm.

Baumueller makes three-phase sunchronous geared motors, with high output torque, compact frame size, high efficiency of 98%, transmission ratios of i=4 and i=8, low circumferential backlash (<3'), lifetime lube, and a low noise level of <65 dBA. Their DSD 45-IPG4 motor features 1125 nM [min-1], 20,4 M0 [Nm], and 98 M0max [Nm].

Bluffton Motor Works offers several types of gearmotors, including right angle types and parallel shaft types, for continuous or intermittent duty. Features include a size 36 or size 48 frame, with 1140 or 1725 RPM, TEFC or TENV enclosure, and worm gear reductions of up to 70:1 per stage. Intermittent duty gear motors offer torque of 6 in/lbs and 1/6 hp.

Click Automation sells Pittman brush commutated DC gearmotors, with two pole permanent magnet construction, copper graphite brushes, diamond turned commutators, and more. Their GM8000 series has a motor diameter of 1.1" and maximum continuous torque of 175 oz/in. Their GM14000 series has a motor diameter of 2.1 inches and maximum continuous torque of 1125 oz/in. The GM9000 Series offers 500 oz/in of torque in a 1.58" diameter.

Composite Motors Inc offers planetary gearmotors and parallel shaft gearmotors, brushless models with any CMI motor, and DC or switched reluctance motors. The GRMA Series gear motor offers an IP-67 enclosure that is Mil-Spec 810 compliant and can operate up to 125 C in 25 C ambient. The BLDA Series brushless motor features a Mil-Spec 810 compliant IP-65 package and is available as air cooled or water cooled up to 12 hp.

Brother International makes the GTR series of helical in-line and Helical/hypoid right angle gear motors. Their IP-44 Mid series motors are made of all hardened steel with CBN ground helical gearing, premium ball bearings for effiecient torque transfer and overhung load capacity, using high-grade synthetic lubrication.

Demag Cranes & Components makes gearmotors, including helical geared motors, angular geared motors, and offset geared motors. Their angular geared motors come in universal type, foot-mounted type, or flange mounted type, with sizes from W10 to W50 with a hypoid wheel pair and a large transmission ratio range and sizes W60 to W100 with bevel gear wheels.

Powertek Equipment Co. sells planetary gearboxes and gearmotors, with a continuous torque rating from 4 KGM to 45,000 KGM and high speed of 500 rpm to 0.01rpm and input power up to 380HP. These motors are for use in mills, textiles, machine tools, paper, cement, plastics, and pharmaceutical applications.

Igarathi Motor Sales offers planetary gearmotors in 22mm, 30mm, and 42mm sizes and spur gearmotors in 20mm, 33mm, and 37mm sizes. Their 30mm planetary gearmotors have a metal housing with sleeve output bearing standard (ball bearing optional), radial play of ≤ 0.05 mm, and radial load of ≤ 3 kgf from 10 mm from face of gearbox.

Micro-Drives sells DC gearmotors with power output frmo 0.6W to 60W, with integral magnetic encoders, precious metal or graphite commutation, 12 to 52mm, gearmotor length of 41 to 170mm, nominal speed up to 1600, nominal torque up to 9.8Nm, and nominal power up to 60W.