Hansen Motors manufactures AC synchronous motors in geared hysteresis and permanent magnet designs. The geared hysteresis synchronous motors have very low cogging torque and are used for back-driving. Available as round 2-hole, round 4-hole, pear shallow, and pear deep types, the hysteresis motors feature speeds from 0.8 rpm to 360 rpm, 360 rpm to 0.5 rph, and 1/2rph down to revolution per week.

Anaheim Automation Inc. manufactures AC synchronous motors for applications requiring constant speed and the ability to stop within a few degrees of rotation. Available in six sizes ranging from 55 mm to 150 mm, these synchronous motors feature a frequency of 60 Hz, a motor speed of 72 rpm, and maximum torque ranging from 51 oz-in. to 1,841 oz-in.

ARC Systems Inc. manufactures hystersis synchronous motors designed to meet military and commercial requirements. The synchronous AC motors range in size from 8 to 44, and are used in applications where constant speed and smooth operation are required. Depending on model the motors feature a synchronous speed spanning 600 to 12,000 rpm; frequencies of 60, 100, and 400 Hz.

Oriental Motors USA Inc. manufactures synchronous motors in frame sizes ranging from 2.36 in. (60 mm) up to 3.54 in (90 mm). The output power of each motor varies from 4 W up to 25 W. The company's synchronous motors run on a single-phase 115 VAC power supply, and provide fixed speed operation regardless of fluctuation of load or line voltage.

B & R Automation offers 3 phase synchronous motors in 4 main lines. All of the lines are available as self cooling with an attached fan module. These synchronous motors are used in the in the packaging, plastic, metals, food and beverage industries as well as material handling. All synchronous motors utilize NdFeB permanent magnets with a sinusoidal commutation with a resolver or EnDat encoder as the feedback unit.

Baumüller Nürnberg GmbH. is a manufacturer of three-phase, synchronous-geared motors that are designed for high torque environments found in handling, robotics, and packaging applications. The company's synchronous motors feature transmission ratios of i=4 and i=8, and a compact frame size for space utilization. Other details of the motors include: low circumferential backlash (<3') and low noise levels (<65 dBa). According to the company, its DSD-IPG synchronous motor has an overload capacity that is up to 40 percent greater than comparable servomotors.

Johnson Electric offers a variety of electric motors. The synchronous motors offered are designed for use in home appliances. There are two juicer motors available both 2 pole, with one designed for 120 VAC and one designed for 230 VAC. Also offered is a synchronous pumps motors for use with washing machines.

Crouzet manufactures a variety of AC synchronous micro motors for use in access control, medical equipment, pumps, valves, billboards, and water treatment equipment and systems. These syncrhonous motors are available from 0.5 to 7 watts either as reversing or single direction with torques up to 5 Nm.

Romanoff Industries distributes AC synchronous motors from manufacturers like Celestron, GE, Siemens and West. Available from 230 to 460 VAC, 2 to 4000 horsepower and from 514 to 4000 RPMs. Totallly enclosed, fan cooled (TEFC) and drip proof synchronous motors are also offered.

Welco technologies manufactures permanent magnet synchronous motors. Samarium Cobalt (SmCO) rare earth magnets allows for a smaller motor design saving weight and space. Its precise open loop speed control eliminates the need peripheral equipment such as tachomenters. Designed for Class B use (80ºC temperature rise) by using Class H insulation(up to 180ºC).

Midwest Timer Services offers mechanical direction system motors and electrically-biased direction system motors. All standard synchronous motors are rated Class A (up to 105º C ambient), but  also available Class B rated (up to 125º C ambient) motors are also available.

Island Components Group offers synchronous and hysteresis motors for military and commercial applications.