Anaheim Automation offers several types of industrial electric motor, including stepper, brushless DC, brushed, AC, servo and more. Their AC electric motors include induction and synchronous types with torque from 16 to 5,664 oz/in, sizes from 60mm to 100mm, power outputs up to 1400 watts, fixed speed of 72 RPM with a power input frequency of 60 Hz, and fourteen different gear ratios.

Arc Systems makes hysteresis synchronous electric, AC induction electric, instrument stepper, brushless DC, and many other motors. AC induction electric motors are offered in motor type 20, 1/1000 hp thru 0.172 hp, 1750 rpm thru 15000 rpm, 0.40 thru 3.25 torque (oz-in), and input voltages of 16v, 108v, 115v, 120v, 200v and 208v.

Oriental Motor USA offers electric stepping motors, AC motors and gearmotors. Electric motor products include electromagnetic brake, torque, induction, clutch and brake, low-speed synchronous and brushless motors. Their V Series induction motors feature frame sizes from 2.36 in to 3.54 in, output power from 6 W (1/125 HP) to 90 W (1/8 HP), and rated torque from 1.59 lb-in to 350 lb-in.

Copal makes electric motors including brushless, DC, vibration, stepping and gear motors. Their vibration motors come in 3.5mm, 4mm, and 6mm sizes as well as a flat coin type brushless motor with integrated electronics, with a speed of 13,500 rpm or 12,000 rpm and overall length of 10mm. Micro DC motors feature rated torque from 0.003 to 0.833 oz-in.

Trust Automation makes rotary servo motors in brushed or brushless models, with the brushed series from 23 to 500 watts, 3000 to 5000 RPM, operating at 0.71lb/in to 19.12lb/in. Low inertia brushless servo motors offer 30 - 1500 watts, 4500 - 5000 RPM, and .96 lb-in – 43.37 lb-in.

Aeroflex designs and manufactures five types of electric DC motors including: brushless DC motors, limited-angle torque motors, stepper motors, voice coils, and zero-cogging brushless motors. The company's stepper motors are available in different design parameters including redundancy, uni/bi-polar, powered/unpowered holding torque, power consumption, envelope, and step angle. The custom voice coils are use in aerospace applications.

Applied Motion Products manufactures electric brushless servo motors and electric stepper motors. Two of the servo motor series feature up to 750 W of continuous output power and 21 in-lb of continuous torque. Another series of servo motors are available in four metric frame sizes and feature power ratings up to 950A. Some of the company's electric stepper motors are intended for high torque applications.

B&R's motion control line includes synchronous motors 8LS, synchronous motors 8JS, synchronous motors 8LT, and synchronous motors 8MS. These synchronous motors are three phase motors with electronically commutation.

Click Automation offers servo motors and step motors. Servo motors includes brush motors from 0.86" - 4" diameter with continuous torques up to 28 in-lb, brushless motors from 1.3" to 4.75" diameter with continuous torques over 700 oz-in, and gearmotors up to 2" diameters. Step motors include 2 phase stepping motors in NEMA 17, 23, 34 and 42 and 5-phase stepping motors with high resolution and no low speed vibrations.

Crouzet offers an array of micromotors including DC motors, brushless motors, synchronous motors, and stepper motors. Range of DC motors includes DC direct-drive brushed motors and DC geared motors with brushes with diameters from 24 to 63 mm, torque from 0.5 to 25 Nm, gearboxes, optical or magnetic encoders, EMC filter, and brakes. Range of brushless motors includes brushless DC motors, brushless DC geared motors and high-performance brushless motors with 20 to 200 W, 28 to 86 mm size, different gearboxes, 20,000 hour service life, ultra high speed of 50,000 rpm and high torque motors. The 0.5 to 7 W synchronous motors includes direct drive single direction synchronous motors, direct drive reversible synchronous motors, single direction synchronous geared motors and reversible synchronous geared motors. Direct drive and geared stepper motors features 2 and 4 phase, 48 pulses/rev resolution (7.5°), and gearboxes up to 5 Nm.

DPM manufactures electric motors, including stepper motors, in sizes from 8 to 42, brushless motors in sizes from 22 to 86, and dc motors in diameters from 8 to 52. Their model 36BL57 brushless motor offers maximum radial force of 10N 10mm from the flange, and an insulation class of B.

ElectroCraft offers electric motors, including BLDC, C-frame AC, housed AC, linear actuator, PMDC, and stepper types. Their DirectPower PMDC motors come in NEMA sizes of 15, 20, 25, and 30 with peak torque from 45 oz-in to 230 oz-in.

Hansen makes permanent magnet DC motors with voltages of 1-42V, brushless DC motors with wattages from 1-350W, geared brush motors with models including 14/16 round, 15 pear large, 15 pear deep, 15 pear shallow, and 15 round 4- or 2-hole with wattages of 25W, 0.3W, or 0.2W.

Haydon Kerk makes stepper linear actuators, in sizes from 8 to 34, including can-stack actuators in diameters of 15mm to 46mm. They also make rotary stepper motors, stepper motor drives, sealed switches, linear rails, guides, and splines, and more.

Schneider Electric makes Mdrive motors, discrete drivers operating at 12 to 80VDC on 1.5 to 9amps, and stepping motors such as 1.9 degree enhanced hybrid stepper motors with high torque and single or double shaft options, as well as encoders and planetary gearbox options.

Kollmorgen manufactures electric permanent magnet motors such as brushless servomotors, brushless step motors, AC synchronous motors, and DC motors. Brushless servo motors include conventional rotary servo motors for speeds up to 8,000 rpm, direct drive rotary motors for high performance, direct drive linear motors with eliminated backlash and high stiffness. Two phase stepper motors are maintenance free and move in 1.8° increments. Series of step motors includes CT series of high torque motors, T Series of NEMA Size 23 motors with holding torques to 421 oz-in, POWERMAX II P and M Series of NEMA 23 motors with holding torques from 42 to 253 oz-in, POWERPAC N3, N4, K3, and K4 Series of hybrid step motors in NEMA 34 and 42, KM Series of NEMA 23, 34, and 42 motors with holding torques from 0.52 to 30/8 N-m, MX series of hazardous duty motors in NEMA 34 and 42 sizes with holding torques from 1.27 to 9.82 N-m. Synchronous motors are offered by Pacific Scientific and Superior Electric in frame sizes of 23, 34, 42 and 66. DC motors are offered in a variety of sizes and types including PMDC motors, DC torque motors, and brush motors.

Lin Engineering specializes in step motors as well as integrated motors, and BLDC motors. Step motors are offered in NEMA sizes 8, 11, 14, 17, 23, and 34. Types of step motors include standard motors, vacuum motors, modular motors, high accuracy motors, slim line motors, super slim line motors, gold line motors, high torque motors, super torque motors, extreme torque motors, dust proof motors, and reduce resonance motors. Integrated motors are offered in NEMA sizes 17, 23, and 34, VDC ranges of 12 to 24 VDC, 7 to 28 VDC, and 12 to 75 VDC. BLDC motors are offered in NEMA size 17 for standard torque  motors and Size 23 for standard and high torque motors.

Micromo designs small, high precision mini-motors and micro motors such as DC motors, brushless DC motors, miniature stepper motors, DC gearmotors, Piezo motors, and linear motors. DC motors include coreless DC motors, flat coreless DC motors, and high power PMDC motors with precious metal or graphite commutation, motor diameters of 6 to 38, 15 to 26 and 34 to 100 mm respectively. Brushless DC motors include brushless DC servomotors, 4 pole servomotors, motors with integrated electronics, flat motors, sensorless motors and motors with integrated controllers. The 1 phase and 2 phase stepper motors feature motor diameters fo 6 to 22 mm and 8 mm, voltage mode of 3 to 24 V and 1 to 5.1 V respectively. Dc gearmotors include flat coreless motors, flat brushless motors, and sensorless brushless motors with precious metal or electronic commutation, and nominal voltage of 3 to 24, 5 to 15 and 3 to 6 V respectively.

Minebea Motor Manufacturing produces a variety of electric motors including fan motors, hybrid-type and PM stepping motors, DC motors, and vibration motors. Depending on motor type, the company's products are used in paper feeding devices, compact appliances, mobile phones and PDAs.

NMB manufactures a number of electric step motors including molded-type flange, hybrid, hybrid linear, permanent magnet and hybrid gear boxes. The company also builds brushless & brush DC motors. The brush motors are used for applications that require small size and significant power output. The brushless motors are used for installations in restricted areas.