Directory

Company Profile

Baldor

Baldor is a manufacturer of a broad range of electric motors and adjustable speed drives including AC motors, AC controls, DC motors, DC controls, gear products, motion control, servo motors, servo controls, power transmission components, linear products, grinders, buffers and generators used in many industrial applications. Baldor is based in Fort Smith, Arkansas and serves distributors and OEMs in over 70 countries.

Company Info

Website
baldor.com
Phone
479-646-4711
Address
AR

Entries

  • in Air Compressor Motors

    Baldor offers premium efficient AC and pump AC motors. Model EL3403 premium efficient AC motors feature TEFC enclosures, ball bearings, ISR copper windings, heavy gauge steel frames, and a low-loss electrical grade lamination steel construction. These motors have voltage ratings up to 230, speeds up to 1745 RPM, and 0.25 HP outputs. They are ideally used in applications where frequent or continuous duty is required.

  • in Brake Motors

    Baldor electric offers a wide range of brake motor configurations, including: VEBNM3538, BM3569, BM3568, BL3517, and BL3516. Motors have voltages up to 460 V, horsepower outputs up to 0.5 HP, and speeds up to 1765 RPM. Additional motor features include: NEMA BA dimensions, spring set, power-off operation, manual release, automatic reset, etc. Motors have the following applications: door operators, conveyors, machine tools, speed reducers, quick stops, positive hold, etc. Other motor offerings include: CEWDBM3538, BL3518, KBM3454, VBM3108, BM3546T, etc.

    View Baldor's Complete Line of Brake Motors

  • in Brushless Servo Motors

    Baldor manufactures DC brushless servo motors with Hall sensors and stainless steel brushless servo motors. The stainless steel motor are designed for industrial applications including food, liquid, pharmaceutical, and other motion control applications. The motor can handle IP67, withstand 1500 psi washdown conditions, and feature speeds of 2000, 2400, or 4000 rpm. The DC servo motors are available in 1/4 to 3 HP designs and rated at 320 VDC to provide 1800 rpm.

  • in Continuous Duty Motors

    Baldor are manufacturers of a variety of continuous duty AC and DC electric motors. DC power motors offer continuous duty and come in a horsepower range of 0.33, .5, .75, 1 and 1.50 HP. Their definite purpose AC motors feature 5 HP, 1750 RPM, 3 phase, 60 HZ, and are TEFC. Baldor also offers super efficiency motors from 1 to 200 HP.

  • in DC Motors

    Baldor industrial motor produces a line of DC motors products. General purpose DC motors feature permanent magnet designs with 5 HP output, wound field designs with 500 HP output, 90 and 180 VDC, 20:1 constant torque speed range and NEMA frame sizes. Washdown permanent magnet DC motors are offered with standard painted finishes or paint free finishes, HP outputs up to 5, 1750 rpm, and 90 and 180 Volts. Explosion Proof Permanent Magnet DC motors feature a power range from 1/4 to 2 HP while the wound field motors feature a power range from 1/2 to 3 HP. Baldor motors metric framed, permanent magnet DC motors feature IEC B5 flange designs with .2 to 5 HP output, B14 C-face design with .2 to 2 HP, 180 volt input power, 20:1 constant torque speed range. Baldor industrial motors are suited for fixed speed power operation and feature 1750 rpm, 115 and 230 Voltage, and HP range from 0.33 to 1.5.

    Website

  • in Electric Motors

    Baldor industrial motor manufactures an extensive line of AC electric motors, DC electrical motors, and electric servomotors. Single or three phase; From food processing to pharmaceutical to chemical to HVAC to high pressure applications; NEMA frames, metric frames, integral tachometer; adjustable SCR speed control; high temperature and moisture resistant models.

  • in Explosion Proof Motors

    Baldor manufactures explosion proof electric motors for DC applications that offer a range of 0.25 hp to 2 hp, 1750 RPM, and a voltage range of 90 V to 180 V.

    View Baldor's Complete Line of DC Explosion Proof Motors

  • in Gear Motors

    Baldor makes AC and DC gearmotors, servo rated gearheads, and speed reducers. Their AC gearmotors feature 1.0 - 13.8 rpm, 101 - 375 torque (lb-in), 1/80 - 1/6 hp, 120:1 to 1369.3:1 ratios, TENV or TEFC enclosures, and voltages of 115v, 208-230/460v, 190/380-415//230/460V, and 115/230v.

  • in Hazardous Location Motors

    Baldor offers hazardous location motors in a variety of configurations, including: CDX1875, CDPX3426, CDPX3416, CDPX3406, and CDPX3545. Baldor motors have horsepower ratings ranging from 0.25 to 2 HP, speeds up to 1750 RPM, and field armature voltages ranging from 90 to 180. Other motor features include: a NEMA-C face, a removable base, a TEFC enclosure, a shunt wound, class F insulation, UL/CSA certification, a thermostat/explosion proof conduit box, etc. These motors have the following applications: machine tools, textile equipment, printing, conveyors, feeders, pumps, etc.

    View Baldor's Complete Line of Hazardous Location Motors

  • in High Torque Motors

    Baldor's DSMS series motor is a high torque stepping motor designed for the industrial motion control industry. Featuring torque ranges from 32 oz-in (22.6 N-cm) to 1061 oz-in (749 N-cm), the motor is available in three frame sizes: NEMA 17, 23, and 34. Input voltages of 12 to 48 Vdc and 12 to 75 Vdc are available. Microstepping resolution up to 51,200 steps per rev is also featured.

  • in High Torque Stepper Motors

    Baldor offers DSMS Series high torque stepper motors. These motors have holding torques ranging from 32 to 1061 oz-in, input voltages ranging from 12 to 75 VDC, up to 51,200 steps per revolution, and three available NEMA sizes. Additional features include: compact, open loop, a Windows interface, integrated motor & drive, panel mounted, industrial motion control applications, etc.

  • in Linear Motors

    Baldor provides a range of linear motors from cog-free units to dual axis models. The LMCF linear cog-free motor is designed for unlimited stroke servo applications that require smooth operation without clogging. These units feature peak forces to 2,400 N, high acceleration to 98 m/s2, and high speeds to 5 m/s with encoder resolution >1 micron. The LMIC has an iron core and is available in both standard and low profile designs for use in material handling, automatic inspection, bonding, drilling, and similar applications. Other selections include the LMBR brushed linear motor, LMAC linear induction motor, and LMSS and LMDS stepper motors..

    Website

  • in Linear Servo Motors

    Baldor is a manufacturer of linear servo motors and stages in a broad range of sizes. Baldor's LMCF series brushless, linear cog-free servo motors are designed for unlimited travel servo applications that also require extremely smooth operation with no cogging.

    • LMCF: Cog-free brushless linear Servo Motor
    • LMIC: Iron Core Brushless Servo Motor
    • HyCore10: Hybrid Core Linear Servo Motor
    • LMBR: DC Brushed Linear Servo Motor

  • in Low Speed, High Torque Motors

    Baldor are manufacturers of low speed, high torque motors. Their BSM N-Series are AC brushless servo motors for industrial motion control applications. The N Series offers a torque capability ranging from 3.9 Lb-In (0.45 N-m) to 354 Lb-In (40 N-m) in continuous stall . There are over 80 models to choose from.

    View Baldor's Complete Line of Low Speed, High Torque AC Motors

  • in Low Voltage Motors (Premium Efficiency)

    Baldor is a manufacturer of over 1000 models of premium efficient, low voltage AC motors. There is a wide range of horsepower, RPM, enclosure (open, TEFC, TENV, etc.), and low voltage options. These are single and three phase premium efficiency AC motors.

    View Baldor's Complete Line of Low Voltage Motors

  • in Metric (IEC) Motors

    Baldor designs and manufactures permanent magnet DC metric frame motors available with a choice of IEC B5 flanges in .2 to 5 HP or B14 C-faces in .2 to 2 HP. The metric frames are designed for replacement on equipment requiring an IEC interface with the gearbox. The motors are also designed for 180 volt input power with a 20:1 constant torque speed range.

  • in Metric DC Motors

    Baldor offers metric DC motors in a variety of configurations, including: VP7424-14, VP3458D, VP3436-14, VP3428D, and VP3311D. These motors have horsepower ratings ranging from 0.15 to 3.70, field/armature voltages up to 180, and RPMs ranging from 1750 to 3000. They have applications for machinery requiring metric mounting dimensions.

    View Baldor's Complete Line of Metric DC Motors

    • VP7424-14: MTR. J28AA, 180VDC
    • VP3311D: .18/.25HP, 1750RPM, DC, D71D, 3320P, TENV, F2
    • VP3428D: .37/.50KW, 3000RPM, DC, D71D, 3416P, TEFC, F2
    • VP3436-14: .56/.75HP, 1750RPM, DC, D80C, 3428P, TEFC, F2
    • VP3458D: .75/1KW, 3000RPM, DC, D80D, 3428P, TEFC, F2

  • in Motor Starters

    Baldor is a manufacturer of soft motor starters. Application software senses changing load conditions and adapts to increase performance. Benefits include reduced wear on mechanical gears, chains and sprockets, broken belts and jammed gearboxes.

    Website

  • in Permanent Split Capacitor (PSC) Motors

    Baldor has a range of permanent split-capacitor motors in horsepower ranging from 1/4 to 1/2. System applications include air handling, heat pumps, refrigeration, evaporators, furnace blowers, continuous air-overs and general air circulation.

  • in Pump Motors

    Baldor is a manufacturer of AC pump motors in hundreds of models. Available types include single and three phase, 1200 - 3600 rpm, 115/230/460 voltages, open/TEFC/OPSB/TENV enclosures, .33 hp, many frame sizes, and much more.

    View Baldor's Complete Line of Pump Motors

  • in Right Angle DC Motors

     

    Baldor designs and manufactures right angle DC gear motors with output ranging from 1.7 rpm to 500 rpm, torque of 0 lb.-in. to more than 400 lb.-in., voltage of 90 or 180, and ratios of 5:1 to 1100:1.

     

    View Baldor's Complete Line of Right Angle DC Motors

  • in Servo Motors

    Baldor designs and manufactures high performance AC brushless, DC and stainless steel industrial servo motors for the motion control industry. Custom designs to your application are available. They offer three series' of AC servomotors for low inertia, high inertia and compact size applications.

    View Baldor's Complete Line of Servo Motors

  • in Stepper Motors

    Baldor makes integrated stepper/driver motors including a 1.8 degree motor with 14 resolution settings (from 400 to 51,200 steps per revolution), available in 17, 23 and 34 NEMA sizes, and provides open loop operation with torques up to 1061 oz-in (749N-cm).

    Website

  • in Submersible Motors

    Baldor are manufacturers of submersible motors. They offer a 30 hp, 1750 rpm, 3 phase, 60 hz, TENV submersible motor for wastewater, slurry pump, aerator and mixer applications. These are all cast iron construction with 416 stainless steel shafts. Baldor submersible motors are suitable for both wet pit and dry pit requirements.

    • P25G2704: 30HP, 1750RPM, 3PH, 60HZ, 250TY, TENV, FOOTLE

  • in Waterproof Motors

    Baldor has a suite of waterproof motors in a variety of speeds ranging from 1 to 100hp. All Baldor waterproof motors are constructed in cast iron, with 416 stainless steel shafts and dual carbon ceramic mechanical seals. Their waterproof motors have dual moisture sensors and submersible motors for wet/dry pit projects, and continuous operation in water, sewage and slurry. Baldor waterproof motors are explosion proof, Division 1, Group C/D and T3C.

  • in Worm Gear Motors

    Baldor offers their GM25280 worm gearmotor in three and single phase motor designs. Features include a helical output stage and ground worm first stage, factory lubricated for life, bidirectional motor seals, no maintenance required, and completely sealed from the environment.

    Website