Fasco has been designing and manufacturing AC motors and blowers for nearly a century. With locations throughout the U.S., Mexico, Australia and Thailand, Fasco offers OEM solutions from blowers for gas furnaces to AC motors for pumps. They employ over 100 engineers and technicians throughout their domestic and international facilities.
Fasco offers a line of AC motors for fan, air conditioner, compressor, pump, heater and mechanical applications. The 3.3" diameter, shaded pole AC motor features a speed range from 1600 to 3000 RPM, 2-4 pole design, power output of 1/50 to 1/5 HP. The 3.3" diameter, PSC AC motor features a speed range from 1050 to 3200 RPM, 2-6 pole design, power output of 1/40 to 1/3 HP. The 3.3" diameter, AC specialty motor features a split phase, 3 phase, vibrator synchronous and hubless fan drive designs. The 4.4" / 4.5" diameter AC motor features a shaded pole and permanent split capacitor with a power range of 1/20 to 1/4 H.P. The 5.1" diameter AC motor features a shaded pole and permanent split capacitor with a power range of 1/25 to 1/2 H.P. The 48 frame or 5.6" diameter AC motor features 4 to 18 poles and a power range from 1/8 to 1 HP. The C frame AC motor features a power range of 1/400 to 1/25 H.P.
Fasco makes AC motors, DC motors, and gearmotors, with their AC motors in sizes from C-frame and 3.3" motors to 56 frame motors, in varying RPM such as their 3.3" shaded pole model from 3000 to 1600RPM in 2-4pole models.
Fasco manufactures FHP gearmotors. AC gearmotors with parallel shaft design features a speed range from 1 to 500 rpm, up to 3000 in-lbs torque, single rotation or reversible types, and electric brake options. DC gearmotors with parallel shaft design features a speed range from 6 to 300 rpm, torque output range from 25 to 800 in-lbs torque, single rotation or reversible types, position feedback and electronic brake options. AC/DC gearmotors with right angle design features a speed range from 4 to 600 rpm, up to 250 in-lbs torque, and speed control. Intermittent or light duty gearmotors feature torque ranges up to 200 in-lbs and a speed range from 1 to 600 rpm. Mid range duty or continuous/intermittent duty AC/DC gearmotors feature high load bearing, torque ranges up to 350 in-lbs and a speeds up to 4000 rpm. High performance or rugged construction AC/DC gearmotors feature torque up to 500 in-lbs and speeds up to 500 rpm.
Fasco offers parallel shaft high torque AC gearmotors. These motors come in 2-4 pole configurations, they have speeds ranging from 5.9 to 464 RPM, and torques ranging from 26 to 600 lb-in. Additional features include: all position mounting, machined aluminum gear cases, hardened gearing, oil bath lubrication, needle bearings, etc. Typical applications include conveyors, food service equipment, switchgear, ice-making equipment, etc.
FASCO manufactures right angle FHP gearmotors, from long-life high performance types to light duty sub-FHP gearmotors. AC gearmotors are available from 1-500 rpm, up to 3000 in-lbs torque, single rotation or reversible. DC gearmotors feature single rotation or reversible action, 25-800 in-lbs of torque and 6-300 rpm. AC/DC right angle gearmotors are series wound motors with an output of 4-600 rpm, and up to 250 in-lb of torque.
Fasco's line of AC motors include 3.3" diameter shaded pole motors and C-frame shaded pole motors. The 3.3" diameter motors are 2-4 pole and available with 1600-3000 RPM. The motors are used in small room heater, humidifier, fan, submersible pump, and blower applications. The C-frame motors are available as 1/400 to 1/25 HP models.