Nippon Pulse America

Entries

• in Brushless Servo Motors

  Brushless direct drive linear servomotors produced by Nippon Pulse America feature shaft diameters from 4mm to 100mm, stroke lengths of 30 mm to 4.6M, peak force of 2340N, and maximum continuous force of 585N.

  • Linear Shaft Motor: brushless direct drive servomotor

• in Linear Motors

  Nippon Pulse America provides a variety of linear motors, including servomotors and stepper motors. Linear shaft servomotors come in diameters from 4 mm to 100 mm, and can achieve stroke lengths from 20 mm to 4.6 m, peak force to 2,340 N, and continuous force to 585 N.

  • Linear Shaft Servomotors: Variety of shaft diameters, ranging from 4mm to 100mm
  • Linear Stepper Motors: Offered in diameters of 25mm and 35mm
  • SCR Linear Shaft Stages: The accuracy of piezo driven stages
  • SLP Linear Shaft Stages: Provides integrated linear shaft support within the housing

• in Linear Servo Motors

  Nippon Pulse America Inc is a manufacturer of a variety of motion control products including motors, stages, controllers and drivers. NPM's line of linear shaft servo motors consists of high-precision direct drive linear servomotors in a tubular design. These motors come in a variety of shaft diameters, ranging from 4mm to 100mm with a maximum continuous force of 585N.

  Website

• in Motor Controllers

  Nippon Pulse America, Inc. (NPA) is a supplier of precision motion control system products. Their PCD/PCL Series of  motion control chips are programmable pulse generators that are designed to control servomotors and stepper motors.

  Website

• in Servo Motors

  The Nippon Pulse linear shaft servomotor is a brushless direct drive tubular designed unit. Features include a simple two part design with a non-critical air gap, high precision ironless design, non-contact, stroke lengths of 20mm to 4.6M, various shaft diameters ranging from 4mm to 100mm, a maximum continuous force of 585N and an achievable peak force of 2340N. This linear shaft servomotor can be used in high speed or high accuracy pick and place or dispensing applications, scanners that need precise movement, applications involving varying force requirements, and applications that need low power requirements.

  Website

• in Stepper Motors

  Nippon Pulse America manufactures linear stepper motors, rotary tin can stepper motors and rotary hybrid stepper motors. Suited for hexapods, syringe/pumps, and low cost linear stage applications, the PFL and PFCL series linear stepper motors are offered in diameters of 25 and 35 mm, with three different thread pitches (0.48mm, 0.96mm, and 1.2mm) on the lead screw, with unipolar or bipolar windings, and with a variety of voltages. Rotary stepper motors rotates in proportion ot the number of pulses sent to the motor. The hybrid stepper motors in the PR series are available in sizes from 20 mm to 57 mm or NEMA size 8 to NEMA size 23, step angles of 0.9 deg or 1.8 deg, and bipolar windings.

  Website