Siemens

Entries

• in Bevel Gear Motors

  Siemens is a supplier of automation equipment and components. Product offerings include helical bevel right angle AC gear motors featuring flange or foot mounting, solid or hollow shaft, motors geared with 2, 3, 5 or 6 stages and gear ratios from 4.57 to 169.53.

  • Helical Bevel Right Angle AC Gear Motors : Torques up to 20,000 Nm

• in Continuous Duty Motors

  Siemens are manufacturers of AC continuous duty motors. Totally enclosed inverter duty motors are rated for continuous operation at 40 C ambient up to 3300 feet above sea level. They are manufactured for severe and hazardous duty. Three models are available with constant torques of 10:1/6, 10:1, and 1000:1.

  Website

• in Electric Motors

  Siemens-manufactured electric motors include low-voltage motors, servo- and main spindle motors, high voltage AC motors, and DC motors. The low-voltage motors feature performance ranging from 0.09 to 4000 kW, while the high voltage AC motors offer power ranges up to 100 MW.

  Website

• in Explosion Proof Motors

  Siemens manufactures an explosion proof AC motor with a cast iron housing. The rated speed for these motors would be 750 - 3600 min-1 or 900-3600 min-1 with a rated torque 0.3 - 10300 Nm or 1.5-1772 lb-ft. This line of explosion proof motors meet the standards of Class I, Group D; Class II, Groups F&G; and Division 1, hazardous areas. Applications include the oil industry, chemical plants, gas works, agriculture or plastic and wood processing industries.

  Website

• in Helical Gear Motors

  Siemens is a supplier of automation equipment. Helical gear motors are available featuring 1, 2, or 3 stage construction, foot or flange mounting, solid shafts, and high power range. Typical helical gear motor applications include conveyor belts, vertical conveyors and packaged good transportation.

  • SIMOGEAR Helical Geared Motors: Stages: 1, 2 or 3

• in High Torque Motors

  Siemens offers direct drive motors for directly driving low speed and high torque applications. The company's 1FW3 series torque motor features static torque of 77-5275 lb-ft, shaft heights of 150 to 280, rated speed of 150 to 800 rpm, rated power of 2.8 kW – 380 kW /  3.7 – 510 hp, and is used converting, metal forming, plastics, printing, and textiles applications. The 1FW6 series torque motor is used for similar applications and feature maximum torque of 132-8040 lb-ft.

  • Direct Drive Motors

• in Medium Voltage Motors

  Siemens are manufacturers of medium voltage motors in a variety of configurations. They offer a complete line of large AC squirrel-cage induction motors, horizontal medium voltage motors (WPII, TEWAC, TEAAC, TEFC), vertical types (WPII, TEAAC, TEFC), and specialty medium voltage motors used for everything from oil production and refining to chemical processing and power generation.

  • Large AC Above NEMA Motors: A complete line of large AC squirrel-cage induction motors
  • Type CG: Horizontal, foot-mounted
  • Type CGV & CGHS: Vertical, flange-mounted
  • Specialty Motors: per API 541 4th Edition & API 547 Specifications

• in Metric (IEC) Motors

  Siemens Automation is a full-line supplier of low voltage IEC motors including standard motors generation 1LE1, standard motors up to frame size 315, marine motors, smoke extraction motors, crane motors, roller table motors, and customized motors.

  Website

• in Motor Controllers

  Siemens duplex motor controllers are designed for applications that require duplex controls such as duel pumps or blowers. These motor controllers perform both duplexing and alternation. Duplex motor controls consist of twom motor starters in one enclosure. Class 83 is a non-combination duplex, while class 84 is a combination duplex motor controller with two separate disconnects or circuit breakers.

  Website

• in Motor Starters

  Siemens manufactures manual motor starters and switches in four classes. Class SMF fractional horsepower motor starters provide on/Off control for small single phase motors. Class MMS and MRS manual motor and reversing switches operate single or three phase AC or DC motors. Class 11 3RV across the line manual motor starters provide local control for single or three phase motors up to 15 HP.

  Website

• in OEM Motors

  The Siemens 1FN3 and 1FN6 motors are permanent-magnet synchronous linear OEM motors for applications that require highly accurate linear path or speed control. These are built-in motors for directly driving high dynamic linear applications. Technical data includes max. force (Fmax) of 260 – 20,700 N, 58 – 4,653 lbf, max. speed at rated force FN up to 836 m/min, 2,743 ft/min, and overload capability/continuous load design of 2.5 x FN / 1.7 x FN.

  Website

• in Parallel Gear Motors

  Siemens offers MOTOX helical offset parallel AC gear motors in both hollow or solid shaft. They have power ranges up to 200 kW, and are rated for torques up to 20,000 Nm, in foot and flange-mounted styles. In addition to  hollow and solid shafts, they also are available in hollow shafts with key connections, shrunk-on disks or splines.

  • Helical Offset Parallel AC Gear Motors

• in Permanent Magnet Motors

  Siemens provides a full line of synchronous, permanent magnet DC motors. The 1FK7 are synchronous permanent magnet motors featured in high dynamic, high inertia and compact models. They are self-cooled and feature rotatable connectors and pre-assembled cables. The 1FT6 are permanent-magnet synchronous motors with triple overload, high surface quality and high degree of protection. The 1FT7 are synchronous motors with a compact size with quadruple overload capability, minimal torque ripple, rotatable connection and a model types of compact and high dynamic. The 1FS6 are synchronous motors with explosion protection and natural cooling with separate terminal boxes. The 1FU8 SIEMOSYN are motors for single and group drives featuring high maximum speeds up to 15,000 rpm.

  Website

• in Pump Motors

  Siemens offers general purpose NEMA pump motors manufactured as Totally Enclosed Fan Cooled (TEFC). These pump motors come in die cast copper rotor design (exceeding NEMA premium efficiency) or with a die cast aluminum rotor design (meets NEMA premium effeciency). Specs include frame sizes of 140T-400, output ranges of 1 to 200 HP, poles 2/4/6/8, frequencies of 50 or 60 Hz, and voltages of 3-ph AC 208-230/460; 575 V.

  Website

• in Servo Motors

  Siemens manufactures synchronous motors including a full line of sevo motors that feature self-cooled, compact motors for standard servo applications. Models include the 1FK7, 1FT6, 1FT7 and 1FS6.

  Website

• in Slip Ring Induction Motors

  Siemens builds asynchronous high-voltage AC slip ring motors with modular cooling systems that make them adaptable to specific applications. The cover and motor enclosure are decoupled from one another for easy installation and maintenance.

  Website

• in Squirrel Cage Induction Motors

  Siemens manufactures a complete line of large AC squirrel cage induction motors at its ISO-9001 Certified plant in Ohio. Siemens produces horizontal AC induction motors up to 18,000 hp and 460 to 13,200 volts. They also offer large AC vertical motors up to 6,000 hp.

  Website